Cylinder tracking software for gas distributors: what to check (2026)

Where is cylinder 4471, and what does the customer owe for it? Why registers fail, three fixes that need no software, and ten tests the software must pass.

The short answer: cylinder tracking software is worth buying when it can answer two questions without a phone call: where is every cylinder right now, and what does each customer owe for the ones they are holding. Before any software, three habits fix most of the problem: a rotation number on every cylinder, a signed delivery and return note, and a physical count once a month. After that, the ten tests below tell you whether a system will actually hold up.

Disclosure: Brimpa builds Brimpa Gas, cylinder tracking and management software that runs at Guru Industries, an industrial and medical gas supplier in Palanpur, Gujarat, with a filling plant and two offices. This guide is written by its builder.

The problem, in a distributor’s words

“Where is cylinder 4471?” A gas distributor owns thousands of cylinders, each worth more than the gas inside, and they are always somewhere else: at a customer, on a truck, at the filling plant, in the yard. The register says it went out to a workshop in March. The workshop says it returned it. The driver does not remember. Meanwhile the rent for that cylinder has either been billed for months it was not there, or not billed at all.

That is the real cost. Not the cylinder that is stolen, which is rare, but the hundred cylinders that drift: out too long with no rent charged, returned but still shown as out, counted at the wrong site.

Why it happens

Paper and spreadsheets track a cylinder as a line in a register, and a register has no memory. When a return is written on the wrong page, or a transfer between your plant and your own office is never written at all, the register does not know. It cannot tell you that cylinder 4471 was delivered twice without a return in between, because nobody is reading all the pages at once.

Software fixes this only if it tracks each cylinder as a record with a history, and refuses entries that cannot be true.

Three fixes that need no software

  1. A permanent rotation number on every cylinder you own, stamped or painted, written on every delivery note. Without it, no system, paper or digital, can track a cylinder.
  2. A delivery and return note signed by the customer for every movement, with the numbers listed. The signed copy is what settles a rent dispute.
  3. A physical count once a month at each site, compared with the register. The difference is the drift, and its size tells you whether software is worth buying.

A distributor who does these three has solved a third of the problem for the cost of a stamp and a notebook.

Where software does the job better

The register cannot answer “what does this customer owe for the days each cylinder stayed out”, because that needs every delivery and return date for every cylinder, multiplied by the rent rate, for every customer, every month. And it cannot refuse an impossible entry. Software can, if it is built the right way. The ten tests below are how to tell.

The ten tests

1. One cylinder’s full history on one screen

Every fill, delivery, return and transfer, in order, with the date and the person who recorded it. If the software cannot show that screen, it is counting cylinders by type, not tracking them. Brimpa Gas keeps every cylinder as a record with that history.

2. Location and stock state kept separate

A cylinder has a location (the plant, an office, a customer’s premises) and a state (in stock, or out with a customer). Software that collapses them into one “status” loses cylinders the moment one is moved between two of your own sites. Test it: move a filled cylinder from the plant to a delivery office, then deliver it to a customer from that office. The plant’s stock should fall and the office’s should rise. Then try to deliver the same cylinder from the plant; the software should refuse.

3. One month of rent for one customer, checked by hand

Pick a customer, pick a month, let the software compute the rent, then check it against the delivery and return dates on the signed notes. If they differ, ask why before buying.

4. Holding limits that warn before a delivery

Each customer has a limit on the cylinders they may hold. The software should know it and warn when a delivery would exceed it.

5. Customer-owned cylinders outside your inventory

Many customers bring their own cylinders to be filled. They should be tracked by quantity per customer, gas and size, not forced into your inventory with serial numbers, or the stock figure will be wrong in both directions.

6. A filling vendor with the flow reversed

If you send cylinders to another plant to be filled, the direction is reversed: you give empties and receive them filled, the opposite of a customer. Any screen or rule that assumes “given means filled” is wrong for a vendor. This exact assumption caused a real bug in Brimpa Gas before the rule was written down. Enter a vendor transaction and watch the stock figure.

7. A late entry and an out-of-order entry

A delivery happens at eight in the morning on a truck and is typed in at six in the evening, after a return from the same customer was entered at noon. Software that only looks at the current state rejects the return. The right behaviour is to replay the cylinder’s history up to the date and time of each entry. Brimpa Gas does this; the test is to enter the return first, then the earlier delivery, and check that both are accepted and the history reads in order.

8. Maintenance as a flag, not a movement

A cylinder due for testing has not gone anywhere. Software that records maintenance as a fake location or delivery corrupts the stock and the rent. It should be a flag on a cylinder standing at the maintenance location.

9. Daily sales and the stock summary computed separately

The two reports the owner reads every day should come from the transactions independently, so a mistake in one cannot hide inside the other.

10. Gap-free bill numbers and documents in your name

Bills, payments and rental charges should carry numbers that never repeat and never skip, per business, and the printed challan, bill and certificate should carry your identity, not the vendor’s.

A test sheet to take to every demo

TestPass / failNote
1. Full history of one cylinder on one screen
2. Transfer plant to office, then wrong-site delivery refused
3. One month’s rent for one customer matches the notes
4. Holding limit warns before delivery
5. Customer-owned cylinders by quantity, outside inventory
6. Filling vendor: empties out, filled back, stock correct
7. Late and out-of-order entries accepted and ordered
8. Maintenance is a flag
9. Daily sales and stock summary computed separately
10. Gap-free bills, documents in our name

Brimpa Gas passes all ten; the rules behind them are kept as a numbered ledger with the code so a fix cannot quietly remove one. That is a claim you should test rather than believe, which is what the demo is for.

Who this is not right for

Brimpa Gas is built for distributors who own the cylinders they deliver to businesses, hospitals and workshops: industrial and medical gases in returnable cylinders, at one yard or across a plant and several offices. It is not built for consumer LPG connections with subsidies, and it does not drive filling hardware. A distributor whose whole operation is one truck and two hundred cylinders may be better served by the three paper habits above for another year.

What it costs

Brimpa Gas is licensed per account; the price depends on the number of locations and users and is written into the licence agreement before the account is opened (checked November 2026). Other systems in India are sold per user per month or as a one-time licence; whatever the model, ask for the two-year total in writing, including set-up and the documents in your name.

Questions people ask

Do I need barcodes or RFID tags? Not to start. A painted rotation number and a signed note are enough for the software to track every movement. Tags speed up scanning at a busy plant and can be added later.

Can drivers use it on the road? If it runs in a browser on a phone, yes. Brimpa Gas does; there is nothing to install.

What about purity certificates for medical oxygen? The filling log and purity test certificates are part of the record in Brimpa Gas, printed in the distributor’s name.

How long does set-up take? Days, once the gas types, cylinder sizes, locations and documents are known. The slow part is the first physical count, which the distributor does.

A demo of Brimpa Gas, with your gas types and your locations, starts on the contact page. The product page has the 60-second tour and what the software does not do.

All posts